GM - 3.8L : CLO# C-3018, C-3058, S610T
INSTALLATION TIP
The cam nose must be thoroughly cleaned before the sprocket is installed. The timing cover gasket must be used for correct spacing of the sensor. If the old interrupter is to be used insure the brass clip is present. The use of the updated 9- 5175 (25535668) is highly recommended.
Note: It is recommended to refer to an installation manual for complete installation instructions. Specifications subject to change without notice.
Ready to replace it?
Find the timing kit that matches the vehicle, or walk through the install procedure with our engineers in the Tech Center.
