Nissan - 2.4L KA24E : CLO# 9-4163S
INSTALLATION TIP
To ensure proper performance of enclosed tensioner (Part # 9-5176), torque bolts to 61-70 in. lbs. (Torquing above 70-in. lbs. may warp tensioner body). Tensioner is to be installed without the use of sealers or gasket material.
To ensure proper performance of enclosed timing chain guide (Part # 9-5178), guide should pivot freely after installation.
Note: It is recommended to refer to an installation manual for complete installation instructions. Specifications subject to change without notice.
Ready to replace it?
Find the timing kit that matches the vehicle, or walk through the install procedure with our engineers in the Tech Center.
