3-Keyway Crank Sprockets
Installation instructions June 13, 2019
The Cloyes® Patented 3-Keyway crank sprocket allows adjustment of the crankshaft timing by ± 4°. Remember: The camshaft angle is half of the crankshaft angle, therefore the camshaft…
Learn moreGear Drive #8-5135 (SB Ford)
Installation instructions June 8, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
moreGear Drive #8-5145 (SB Chev Fact Roller)
Installation instructions June 7, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
moreHigh Performance Sets
Installation instructions June 6, 2019This Cloyes timing set is equipped with multiple keyways on the crankshaft sprocket to allow adjustment of the camshaft timing relative to the crankshaft. In general, advancing the…
moreQuick Adjust™ Timing System
Installation instructions June 5, 2019Note: If you are using the 3-keyway crank sprocket and using the advanced keyway, the maximum camshaft advance will be 8o and maximum retard will be 4o. If using the retard keyway, the maximum advance will be 4o and maximum retard will be 8o.
moreQuick Button® Timing Cover
Installation instructions June 4, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST!!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would be…
moreHex-A-Just (4.6 Ford Modular SOHC)
Installation instructions June 3, 2019FORD 4.6L MODULAR SOHC ENGINES 9-3162A, 9-3163A, 9-3164A, 9-3165A, 9-3166A, 9-3169A, S764HAJ, S766HAJ STOP: Read all instructions before installation. Note: These instructions pertain to the adjustable sprockets only….
more3-Keyway Crank Sprockets
Installation instructions June 13, 2019The Cloyes® Patented 3-Keyway crank sprocket allows adjustment of the crankshaft timing by ± 4°. Remember: The camshaft angle is half of the crankshaft angle, therefore the camshaft…
more9-Keyway Crank Sprockets
Installation instructions June 12, 2019Cloyes’ 9-keyway crank sprockets give the installer the ability to correct or re-position camshaft timing during engine assembly. As a general rule, retarding the cam timing will increase…
moreCheck for Proper Alignment
Installation instructions June 11, 2019BE SURE TO CHECK FOR CLEARANCE BETWEEN THE ENGINE BLOCK, SPROCKETS AND TIMING CHAIN. CAUSES OF INTERFERENCE COMMONLY COME FROM SLIGHT BLOCK VARIATIONS, WORN CAM THRUST SURFACES, OIL…
moreGear Drive #8-5100 (SB Chevy)
Installation instructions June 10, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
moreGear Drive #8-5110 (BB Chevy)
Installation instructions June 9, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
moreGear Drive #8-5135 (SB Ford)
Installation instructions June 8, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
more
