INSTALLATION TIP To ensure proper performance of enclosed tensioner (Part # 9-5179), supplied gasket is to be installed without the use of a sealer product. Note: It is…
GM has had different timing mark designs on both the timing and balance shaft chains. Independent of GM’s designs, Cloyes has designated the timing marks as shown in the illustrations to the right. With all designs…
GM has had 3 different tensioner designs. The 1st design had a rubber O-‐ring, had a larger tensioner piston, and was…
GM has had different timing mark designs on both the timing and balance shaft chains. Independent of GM’s designs, Cloyes has designated the timing marks as shown in…
INSTALLATION TIP The original cam sprocket (P/N 4448897) was redesigned by Chrysler. With a shorter hub, which required a thicker thrust plate. S-788T (P/N4778707) is a new kit…
Cloyes’ 9-keyway crank sprockets give the installer the ability to correct or re-position camshaft timing during engine assembly. As a general rule, retarding the cam timing will increase…
This is a difficult installation and should be done only by a qualified technician with access to professional installation tools and manuals. Failure to follow all proper installation…
100 to 110
INSTALLATION TIP To ensure proper performance of enclosed tensioner (Part # 9-5179), supplied gasket is to be installed without the use of a sealer product. To ensure proper…
INSTALLATION TIP The cam nose must be thoroughly cleaned before the sprocket is installed. The timing cover gasket must be used for correct spacing of the sensor. If…
INSTALLATION TIP To ensure proper performance of enclosed hydraulic tensioner (Part # 9- 5294), torque bolts to 8 – 10 n-m. (Torquing above 10 n-m. may warp aluminum…
TIMING CHAIN TENSIONER INSTALLATION ALERT GM 2.4L DOHC 1996-2006 This tensioner consists of two parts, the housing and the piston. The piston has a secondary piston or plunger…
100 to 105
