INSTALLATION TIP The lock washer between the 9-5064 guide and block must be used. The first S-567 sprockets must be mounted with the chamfer toward the oil pump…
BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
This Cloyes timing set is equipped with multiple keyways on the crankshaft sprocket to allow adjustment of the camshaft timing relative to the crankshaft. In general, advancing the…
Note: If you are using the 3-keyway crank sprocket and using the advanced keyway, the maximum camshaft advance will be 8o and maximum retard will be 4o. If using the retard keyway, the maximum advance will be 4o and maximum retard will be 8o.
111 to 121
INSTALLATION TIP There is a special procedure in the service manual that must be followed that includes special tools and a step by step procedure that must be…
See image for center distance illustration.
Aluminum gears feature a press fit bore. To correctly install the gear onto the cam, place the gear into a pan of water. Heat the water to 200o…
BE SURE TO CHECK FOR CLEARANCE BETWEEN THE ENGINE BLOCK, SPROCKETS AND TIMING CHAIN. CAUSES OF INTERFERENCE COMMONLY COME FROM SLIGHT BLOCK VARIATIONS, WORN CAM THRUST SURFACES, OIL…
111 to 116
