Ecotec 2.0L, 2.2L, 2.4L : Primary Chain
Installation Tips June 13, 2019
GM has had different timing mark designs on both the timing and balance shaft chains. Independent of GM’s designs, Cloyes has designated the timing marks as shown in…
Learn moreDodge, Chrysler – 2.0L : CLO #9-5225
Installation Tips June 11, 2019INSTALLATION TIP There is a special procedure in the service manual that must be followed that includes special tools and a step by step procedure that must be…
moreCenter Distance Illustration
Installation Tips June 11, 2019See image for center distance illustration.
moreAluminum Cam Gear Installation Tip
Installation Tips June 11, 2019Aluminum gears feature a press fit bore. To correctly install the gear onto the cam, place the gear into a pan of water. Heat the water to 200o…
moreCheck for Proper Alignment
Installation instructions June 11, 2019BE SURE TO CHECK FOR CLEARANCE BETWEEN THE ENGINE BLOCK, SPROCKETS AND TIMING CHAIN. CAUSES OF INTERFERENCE COMMONLY COME FROM SLIGHT BLOCK VARIATIONS, WORN CAM THRUST SURFACES, OIL…
moreGear Drive #8-5100 (SB Chevy)
Installation instructions June 10, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
moreGear Drive #8-5110 (BB Chevy)
Installation instructions June 9, 2019BEFORE YOU BEGIN: READ ALL OF THESE INSTRUCTIONS FIRST !!! Note: The installation procedures which follow assume that the engine has been disassembled and cleaned as it would…
moreEcotec 2.0L, 2.2L, 2.4L : Primary Chain
Installation Tips June 13, 2019GM has had different timing mark designs on both the timing and balance shaft chains. Independent of GM’s designs, Cloyes has designated the timing marks as shown in…
moreDodge, Chrysler – 3.3L, 3.8L : CLO# C-3077, S788T
Installation Tips June 13, 2019INSTALLATION TIP The original cam sprocket (P/N 4448897) was redesigned by Chrysler. With a shorter hub, which required a thicker thrust plate. S-788T (P/N4778707) is a new kit…
more9-Keyway Crank Sprockets
Installation instructions June 12, 2019Cloyes’ 9-keyway crank sprockets give the installer the ability to correct or re-position camshaft timing during engine assembly. As a general rule, retarding the cam timing will increase…
moreDodge, Chrysler – 2.7L DOHC V6
Installation Tips June 11, 2019This is a difficult installation and should be done only by a qualified technician with access to professional installation tools and manuals. Failure to follow all proper installation…
moreDodge, Chrysler – 2.6L : CLO# 9-4145S, 9-4145SA
Installation Tips June 11, 2019INSTALLATION TIP The lock washer between the 9-5064 guide and block must be used. The first S-567 sprockets must be mounted with the chamfer toward the oil pump…
moreDodge, Chrysler – 2.0L : CLO #9-5225
Installation Tips June 11, 2019INSTALLATION TIP There is a special procedure in the service manual that must be followed that includes special tools and a step by step procedure that must be…
more
