INSTALLATION TIP To ensure proper performance of enclosed tensioner (Part # 9-5176), torque bolts to 61-70 in. lbs. (Torquing above 70-in. lbs. may warp tensioner body). Tensioner is…
INSTALLATION TIP The cam nose must be thoroughly cleaned before the sprocket is installed. The timing cover gasket must be used for correct spacing of the sensor. If…
INSTALLATION TIP To ensure proper performance of enclosed hydraulic tensioner (Part # 9- 5294), torque bolts to 8 – 10 n-m. (Torquing above 10 n-m. may warp aluminum…
TIMING CHAIN TENSIONER INSTALLATION ALERT GM 2.4L DOHC 1996-2006 This tensioner consists of two parts, the housing and the piston. The piston has a secondary piston or plunger…
GM has had different timing mark designs on both the timing and balance shaft chains. Independent of GM’s designs, Cloyes has designated the timing marks as shown in the illustrations to the right. With all designs…
GM has had 3 different tensioner designs. The 1st design had a rubber O-‐ring, had a larger tensioner piston, and was…
GM has had different timing mark designs on both the timing and balance shaft chains. Independent of GM’s designs, Cloyes has designated the timing marks as shown in…
12 to 22
INSTALLATION TIP To ensure proper performance of enclosed timing chain guide (Part # 9- 5181), guide should pivot freely after installation. Note: It is recommended to refer to…
INSTALLATION TIP To ensure proper performance of enclosed tensioner (Part # 9-5179), supplied gasket is to be installed without the use of a sealer product. Note: It is…
INSTALLATION TIP To ensure proper performance of enclosed tensioner (Part # 9-5179), supplied gasket is to be installed without the use of a sealer product. To ensure proper…
12 to 17
